RockShox rebound adjuster knob cap (w/ .f3d)

This is a cap for the Rock Shox rebound adjuster knob. It's the same on my SID 2020 and Reba 2013.

Very useful to protect the nob from hits or when you leave the bike on the floor without the front wheel.

Rotate the cap 90º in the Slicer, Fusion360 always exports the thing wrong.

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

No

Supports:

No

Resolution:

0.16

Infill:

25%

Filament: Sakata 3D PLA Glow Yellow

Notes:

Very easy to print

Measured the nob with a caliper, did the first version on Fusion360 that was nearly perfect and adjusted it a little bit to be tighter.