This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220
This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.
For very large phones, the movable holder can also be mounted upside down, so that even more space is available.
There are now different versions for charging pads from different brands.
The "Powerwave charging dock" I have printed and tested.
The "IKEA Livboj charging dock" is only based on a 3D model of the IKEA pad. Since I do not own this pad, I could not test it. If you print this model, please let me know if everything fits or if I need to adjust something.
Oh, if someone wants to have another holder for a different charging pad, I can customize the model easily. However, I need the dimensions for this. A hand sketch should be enough. Please also include the radii of the charging pad, as these will hold the pad in position. Here is an example of how such a sketch could look like.
The alignment of the parts should be as shown in the picture, so that the visible side of the holder rests on the print bed. The moving part should lie on the back straight surfaces.
_______
German:
Dies ist ein Remix meines Anker Ladepadhalters. https://www.printables.com/de/model/134220
Diese verstellbare Qi-Ladestation kann an jede Handygröße angepasst werden. Darüber hinaus ist es möglich, das Telefon vertikal oder horizontal zu laden.
Für sehr große Telefone kann die bewegliche Halterung auch umgedreht eingesetzt werden, so dass noch mehr Platz zur Verfügung steht.
Es gibt mittlerweile verschiedene Versionen für Ladepads von verschiedenen Herstellern.
Die "Powerwave charging dock" habe ich gedruckt und getestet.
Die "IKEA Livboj charging dock" basiert nur auf einem 3D-Modell des IKEA-Pads. Da ich dieses Pad nicht besitze, konnte ich es leider nicht testen. Wenn du dieses Modell druckst, lass mich bitte wissen, ob alles passt oder ob ich etwas anpassen muss.
Ach, wenn jemand noch einen Halter für ein anderes Ladepad haben möchte, kann ich das Modell gerne anpassen. Dazu benötige ich allerdings die Maße. Hierfür sollte eine Handskizze reichen. Dabei bitte auch die Radien des Ladepads angeben, da diese das Pad in Position halten. Hier ist ein Beispiel, wie so eine Skizze aussehen könnte.
Die Ausrichtung der Teile sollte wie in der Abbildung gezeigt vorgenommen werden, so dass die sichtbare Seite des Halters auf dem Druckbett aufliegt. Das bewegliche Teil sollte auf den hinteren geraden Flächen aufliegen.
The author remixed this model.
This one is for Ikea Livboj, Powerwave, Anker and Nillkin