The TIE/ba Baron Interceptor is a starfighter used by the best pilots of the First Order. It appeared in the first Season of Star Wars:Resistance as the starfighter of Major Vonreg. The design is a combination of a TIE Interceptor and a TIE Advanced V1.
This is a model at 1:270 scale. Its 35.6mm long, 26.1mm wide and 22.8mm tall.
For a holder, it is compatible with a small peg, pin and base.
Printed at 0.1mm layer height. Requires supports on buildplate.
Rotate by -90° along the x-Axis so that the back of the ship points down towards the printbed and the cockpit points up. (This reduces the amount of supports.)
The wing tips can cause stringing.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
I've discovered that according to Lego Star Wars: The Skywalker Saga, this ship is 9.6m long and have rescaled the model accordingly. It is now a tiny bit smaller than before. I've also modified the cockpit window so that the individual panes are still visible on the print.
The author marked this model as their own original creation.