Modern Key Hanger

Simple to print and (hopefully) an aesthetically pleasing key holder that can fit in any household. 

You print the hexagon platform and any number of keychains you need. I personally used glue for sticking it on the wall, however strong double-sided tape should be more than enough to hold it without any problems. As requested, I also added files with holes for screws!

Printing instructions

• Key Hanger - Platform: Print without support, since you do not need much detail in a vertical direction, layer height of 0.24-0.32 is a good trade-off between print speed and the final quality.
• Keychain - Layer height between 0.08 and 0.2. I used 100% infill.

My Twitter :)

In case you have any requests, feel free to send me a message and I will try to help you out!