THE Photo Frame - one file, no supports

Minimalistic photo frame with printability in mind.
1h 0m
1× print file
0.24 mm
0.60 mm
16.00 g
Creality Ender 3
In the contest Picture Frames
391
1128
12
5967
updated March 10, 2022

Description

PDF

The idea behind this design was to create a photo frame that is as simple as possible while still being unique in its own way.

 

 

Standard dimensions
  • 9x13cm
  • 10x15cm

 

Updates
  • 26.03.2022 - Added portrait version for the 10x15

 

Printing details 
  • Print with given orientation
  • You do NOT need to use supports - there is only small bridging that is quite forgiving
  • Infill percentage 100%
  • Layer height 0.24

 

The majority of printers should be able to finish this print below 90 minutes while using less than 20 grams of filament. If you cannot put the picture in place due to minor stringing in the corners, simply use a knife or something thin to clear the way for it.



If you have any requests, such as different dimensions, feel free to hit my DMs and I might be able to help you out :)
Have a good one!

Tags



Awarded in the contest


Picture Frames
181 entries | March 4 – March 13, 2022

Model origin

The author marked this model as their own original creation.

License