This is a snake model made in Fusion 360. It will fit a 200x200mm bed if rotated correctly, I printed on a 220x220 bed.
Best to print this snake in TPU or other flexible filament, but other filaments work as well.
I would love to see some makes! :D
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.3, doesn't matter
Infill:
10% Cross 3D
Notes:
Took me about 37 minutes to print this with these settings at 60mm/s.
The eye hole is 1.76mm in diameter, should fit a piece of 1.75mm filament.This is not meant to be parametric, I tried editing the starting sketch and it didn't work.
Included with the files are a high-poly and a low-poly STL file, along with the F3D file.
Category: Toys & GamesThe author marked this model as their own original creation. Imported from Thingiverse.