Customizable Tesseract

This is a fully customizable tesseract for all your tesseract needs.

Customize the post radius, outside box size and inside box size with OpenSCAD or Customizer.

This can be used as a Marble Trap! See this page for more information.

Also known as a Hypercube.

*not an actual tesseract, this is the 3D shadow of a 4D tesseract.

Print Settings

Printer:

Anet A8

Rafts:

No

Supports:

No

Resolution:

0.1-0.35

Infill:

10%

Notes:

You may need to clean up stringing after this print.
If you use Cura, or a slicer with similar setting, enable Z Hop under Travel so the nozzle doesn't get caught on the posts, sometimes they curl up.

The file name refers to the outside and inside lengths. 57-19_tesseract.stl is with a 57mm outside length and a 19mm inside length.

I have discovered a error in the code, it has been fixed.

̶T̶h̶e̶ ̶i̶n̶n̶e̶r̶ ̶c̶u̶b̶e̶ ̶a̶d̶d̶s̶ ̶d̶o̶u̶b̶l̶e̶ ̶t̶h̶e̶ ̶p̶o̶s̶t̶ ̶r̶a̶d̶i̶u̶s̶ ̶t̶o̶ ̶t̶h̶e̶ ̶l̶e̶n̶g̶t̶h̶,̶ ̶s̶o̶ ̶a̶ ̶1̶5̶m̶m̶ ̶i̶n̶n̶e̶r̶ ̶c̶u̶b̶e̶ ̶a̶n̶d̶ ̶a̶ ̶2̶m̶m̶ ̶r̶a̶d̶i̶u̶s̶ ̶w̶i̶l̶l̶ ̶m̶a̶k̶e̶ ̶a̶ ̶1̶9̶m̶m̶ ̶c̶u̶b̶e̶.̶ ̶1̶5̶+̶(̶2̶x̶2̶)̶=̶1̶9̶

The remixes I have made have been deleted because of the fixed bug.