Sovol SV08 drag chain system - Extruder Cable Support
This is the cable chain and attachment that connects the SV08 extruder to the frame.
25
67
1
516
updated March 3, 2025
Model files
drag_chain_180.stl
drag-chain-joint-2way-main.stl
drag-chain-joint-2way-sub.stl
drag-chain-joint-2way-gap_filler.stl
drag_chain_jointparts.stl
drag_chain_adapter_upper.stl
drag_chain_adapter_lower.stl
drag_chain_clip.stl
Model origin
The author remixed this model.
Differences of the remix compared to the original
Since the cable chain could only bend a maximum of 90 degrees per part and hit the inner wall when the head moved to the far left, a compatible cable chain model was created by rounding the lower corners so that it could be bent 180 degrees.