printed in Extrudr Flex medium
Tesla Model S/X/3/Y HW3 (up to 2023) Rear Camera Shield
Surrounds the rear camera of HW3 Tesla Model S/X/3/Y HW3 to keep the camera cleaner.
48
1471
7
4280
updated March 1, 2025
Makes
Comments
A very delicate print. Required some brims on the printbed but in the end it turned out nicely.
"more hydroponic" – 🤣 you mean hydrophobic
@MatthiasU_58456 Yep, no clue how autocorrect did that.
Fits nicely! I can't wait for it to snow again so I can see how it does
Fits nicely on my Y 2022 from Shanghai.
Whether it works in terms of preventing grime buildup remains to be seen 🙂
Printed it in Black PETG. Fits well in 100% but a small section is Visible in the Camera Display.
Printed in PETG at 100% scale. Had a little bit of stringing (and a bit of old red PLA left over in the nozzle)
Printed with brim, without supports, at 0.15mm on a Voron Switchwire. (edited)
