Case for the BigTreeTech PiTFT70 screen, new version

Screen and Pi case for the BIGTREETECH PI TFT70

Designed to mount on 4040 rail in either portrait or landscape.

Needed Items

Screen: https://biqu.equipment/products/bigtreetech-pi-tft43-v2-0-screen-board

7 M3x4 heat set inserts one for the hinge and 4 for the mount and 2 for the case

1 M3x35 screw as the hinge pin 

6 M3x5 screws for mount and case

90 degree usb cables USB C for power and USB A to the printer or a USB hub for pinter and cam. 

https://www.amazon.com/gp/product/B07QYPZBNH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

https://www.amazon.com/gp/product/B083TGBMR4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

To rotate the BTT PITFT70 and likely other PITFTs add the correct one to your config.txt, for portrait with this case you need 270 degrees. 

# For 0 degree rotation:

# (no additional entries - default setting)

# For 90 degree rotation (top to right):

#display_lcd_rotate=1

#dtoverlay=rpi-ft5406,touchscreen-swapped-x-y=1,touchscreen-inverted-x=1

# For 180 degree rotation (upside down)

#display_lcd_rotate=2

#dtoverlay=rpi-ft5406,touchscreen-inverted-x=1,touchscreen-inverted-y=1

# For 270 degree rotation (top to left)

#display_lcd_rotate=3

#dtoverlay=rpi-ft5406,touchscreen-swapped-x-y=1,touchscreen-inverted-y=1

Updated version to add heat set inserts and a new mount to mount on 4040 rail.