Anycubic Vyper & Kobra Max Direct drive mount

Here are the extruder and steppers ive used and work wonderful. 

https://www.amazon.com/gp/product/B07TY4BFF2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Need to get Right hand version 

https://www.amazon.com/dp/B096P4X9FY?ref=ppx_yo2ov_dt_b_product_details&th=1

I printed in ABS 100% infill but PLA or PETG will work, it needs supports. 

Pictured is the short version, Ill publish the cable clips on another post if interested.

Enjoy 

Ive cut and adjusted the positions to better fit a BMG flipped the right way up instead of the backwards orientation that Anycubic has it.  You will need to reverse the direction of your stepper motor. 

Use m4 nuts between the stepper and extruder as spacers if you need a little bit of adjustment.