Sensiron SDC30 CO2 Sensor Case
a case to hold a Sensiron SDC30 CO2 Sensor
0
7
0
52
updated February 2, 2025
Description
PDFA case to house an SDC30 Sensiron CO2 Sensor.
Model origin
The author remixed this model.
Differences of the remix compared to the original
This case only holds the SDC30 Sensor and it sits snugly, without the need for screws to hold it in.
The top is now solid (no display hole), and snaps snugly in place, without the need for any “clips” to hold it. (Keine Klammer notwendig).
Modified the air intake slots slightly.
I also added slots for a 2.5 mm Cable Tie, which can be used to secure the cables to the side of the case. Effectivly protecting the cables from being pulled from the sensor.
