Parametric protective case / toolbox

This vox is amazing! Everything fit perfect.

Printed a 15x15cm box. Screw holes were just right for the M3 screws; I set a very small negative offset for holes in my slicer and they were still a good size. TPU fits nicely in the slot as a seal. The box is a tight squeeze to close when the seal is in place; maybe a tad too tight but it seems to be okay for now. :)

Thanks for the model, OP! The icon on top is simply glued on with hot melt glue.

- 0.4 nozzle printed at 0.2mm layer heights on Ender 3 with direct drive and 25% fan (at 24v Delta 5015).
- Micro Center's Inland Shimmer PLA in Gold
- Micro Center's Inland PLA in Silk Silver
- Generic black oxide-coated M3x30mm screws (edited)

Great model that is easy to adjust in fusion and prints perfectly and assembled with no adjustments needed.

Printed with Black & White PETG

Thanks for the handy toolboxes. 2 fits all the tools I typically use. Had to go with colors that match my printer motif :)

This isn't a bad model but I see no files with parameters. Am I missing something?

What program do you use to modify the parameters?

Turned out Great..