Dog Bowl Stand

CHECK OUT THE BETTER, UPDATED VERSION!
https://www.printables.com/model/139888-dog-bowl-stand-remix

-------------------------

I needed a stand to elevate the water bowl so I made this. It's an old design I revisited yesterday when I needed to print a second. I added proper threads for larger screws and added pegs to help with alignment. Not my best work, but it's functional and the old stand has been holding up for probably 2+ years now. Print works on a Prusa MINI.

-Requires 8 M5 screws 10-15mm length

-Print 4 legs, 2 short sides and 2 large sides

-Make sure your infill around the threaded holes is sufficient (I used 20%). You can use a modifier shape in PrusaSlicer in the threaded areas to set the high infill. The rest of the print is fine with 5% and 3 perimeters.