I found this focus wheel at https://www.thingiverse.com/thing:714475, but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works really well with my camera mount. The third photo is me holding up the original to the one I installed.
I’ve been told this works on the C310 and C505 cameras too.
Prusa default .2mm Quality settings on my mini clock it at 51 minutes whereas it took over 40 minutes to print just the cover of the original.
Requires 2x M3 screws to secure the cover.
Printed in Printed Solid Jesse PETG in Pure Cyan.
The author marked this model as their own original creation.