Any other hotends supported? I'm pretty invested in microswiss. I'd like to put this on my sv08
Yavoth Toolhead Demon Remix For Rapido 2 UHF, Orbiter 2, BTT Eddy, EBB36, Voron, SV08
Remixed files to suit the listed components!
59
87
0
1717
updated February 19, 2025
Makes
Comments
Finally getting a chance to install this :) Am I right that the stock belts aren't long enough? I think I can make this work by making it slightly fatter and adapting it to use ApexClips for belt mounting... (I don't know why I didn't realize the X carriage was standard; found it. Testing ApexClips version and will post!)
(Also re the LED -- yeah, wires were my issue. I was using silicone wires but with a fairly thick sleeve so was hard to jam things in there!) (edited)
@vvuk You gotta show me when you're done! What printer are you installing it on?
@vvuk on a voron 2.4 the belts are fine, it depends on what machine you’re putting it on & how long the belts are. The carriage has a mount for the Toolhead board posted here.
Wires for the NeoPixels need to be very light gauge, you can’t use thick wires or they won’t pass out the rear under the fans, which is an aspect of the original design.
Any way the carto/beacon can go on here? Also was wondering if i could put ebb42 on it instead of 36?
@vvuk Thank you very much!
Mind sharing the STEP file of the LED holder? It's been a pain to print for me, as well as to try to get everything to fit even with fairly neat soldering, I'd like to modify it to add more internal clearance. Thanks!
@vvuk Oh hi, just saw your comment, somehow I missed it. I see you got it sorted & remixed the stl. The model is quite simple to print if you stand it on its blank thin end & add a small tree support in the opening edge on the side. Wire choice is important as using too thick wire makes the whole unit difficult to assemble. So very thin silicone wire around 1mm thick is ideal here, if this is used then original model is ok.
Can you post STEP files? I want to try and make this work for the SV08
View one more comment
@FLYNINDUSTRIES I meant with the stock extruder
@DuncanIdaho_2816758 Ahhh ok sorry now thats a totally different thing! I'd recommend trying the original file as the top part of this one is modified to specifically fit the Orbiter v2. The original file is larger on top so should give you a better platform to fit the Sovol extruder. However I would suggest using the Orbiter v2.5 instead as it's a far superior unit. The original files are available here if you did want to test it out for the sovol extruder... https://github.com/chirpy2605/voron/tree/main/V0/Yavoth/CAD