This is a model of the interior and exterior of the tower behind the Owl House.
There's also a version of this tower as a dice tower (toh_house-dice tower.stl)
Here's a list of all parts of the Owl House:
Dimensions | Length | Width | Height |
---|---|---|---|
entire house | 179mm | 176mm | 166mm |
ground floor | 179mm | 172mm | 75mm |
middle floor | 107mm | 154mm | 48mm |
top floor | 103mm | 91mm | 80mm |
tower (this) | 103mm | 107mm | 282mm |
The tower has 3 floors, not counting the roof.
I have taken some creative liberties with this model. I've added a door and a staircase. The show (seemingly) only shows one floor of the iterior, which I've split across two floor for this model to make room for the staircase. I've also designed a new room for the lowermost floor.
Printed at 0.2mm layer height.
I've used adaptive layer height for toh_house-tower 1.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
[UPDATE 2025-01-14] added dice tower
The author marked this model as their own original creation.