h2_to_mini-ITX-adapter

Odroid H2 to mini-itx adapter

Following a conversation on odroid forum , several ideas were bouncing around for enclosing the new odroid H2 motherboard.

This model is one idea for using an adapter to interface between an mini-itx motherboard and the H2. The important elements for mounting the H2 include leaving at least
10mm below the motherboard for ram and NVME drive, and then only lifting the board as required to fit the rear opening.

The adapter and H2 are supplied in Designspark v4 format (.rsdoc). The OdroidH2 and the adapter are also supplied as sat (ACIS) files and STEP files. There is also an Acrobat 3d pdf for assembly.

The simplest way to convert rsdoc or scdoc files to step (without buying the workbench)

• rsdoc file converted to sat using rsdoc_to_sat [[https://github.com/arekm/rsdoc-to-sat]]

• sat file converted to step file using grabcad [[https://workbench.grabcad.com]]
  several reference step files are from grabcad (hdwe and pin header)

  reference matl :
  https://www.hardkernel.com/shop/odroid-h2/
  https://www.protocase.com/resources/how-to-design-for-motherboards/

Print instructions

Category: Computer Print Settings

Printer Brand: LulzBot

Printer: Mini 2

Rafts: Doesn't Matter

Supports: Doesn't Matter

Resolution: 0.2

Infill: 20

Notes:

I use a taz4. It is not a mini 2, but I can't save without choosing "mini 2".