Raspberry Pi 4 & 5 PoE Case

Case that fits the Pi 4B with PoE Hat, also has optional mounts to attatch to a wall or wherever. (Pi5 experimental)

4h 57m

2× print file

0.15 mm

0.40 mm

32.00 g

307

1783

updated December 4, 2024

Description

Case to use with Raspberry Pi 4 Model B and the offical PoE Hat, should also fit other hats as long as they arent taller than the official one.

There are several versions of the case top for different models of the PoE hats:

PoE - The original case, tested and is what was used in the model pictures.

PoE+ - A newer version of the PoE hat, fan has been moved a little. This model was created based on a screenshot of a pdf, not tested.

52Pi EP-0127 - Practically the same as PoE with a tiny offset for the fan holes.

04.12.2024:

Added case for Pi5 with top for Waveshare PoE M.2 HAT+, can make more if other hats are used, not tested on an actual device, modeled from CAD.

The fan can be quite annoying, it's curve is set quite aggressive by default. Here is a guide on a better curve for the fan:

The author marked this model as their own original creation.