BMR micro satellite (Tectonic Elements TEBM35C10-4)

Nozzle: 0.6mm for best results
Material: PLA, ABS
Supports: Not needed

Micro satellite speaker utilizing a BMR designed to stand upright (using an additional stand) or be laid flat under a TV/PC monitor. Thanks to super wide radiation of BMR, it doesn't need to point at the listener, which makes it easier to hide.
To be supported by a subwoofer (see my other projects) placed between the speakers, as this driver is not really suitable to be used below 150Hz. You can add a 470uF non-polarized capacitor in series for a bit better frequency response at the bottom end and a bit of a protection.

Consisting of three parts:

1. box - print backside down
2. baffle - print backside down
3. cover (optional) - print frontside down

Cover is held to baffle by two pairs of three neodymium magnets 10x1mm. Or just improvise… Fill the box with polyfill or similar. Drivers to be held by M2 screws - drill holes for threaded inserts.