Original Prusa MK4S Status LED Diffusor (Remix)

Updates 

18. November 2024: removed the minimally longer diffusor file because the updatet fits well for PLA and PETG. 

Added the .stl files for the diffusor as recomended by @perform3d, to make it printable in one part for MM-users and also added the xLCD_LED_frame_diffusor.3mf file. 

In order to obtain a diffuser that is as transparent as possible, the perimeter value should be set to 7

14. November 2024 (obsolete) :  added 0.2mm shorter diffusor .3mf for easier fitment when printed with PLA.

This is a remix of the Original Prusa XL/MK4 RGB Status LED Diffusor xLCD from @perform3d

It is designed to fit on the molded xLCD cover from the Prusa MK4S

printing recommendations:

0.20mm Structural, 0.4 nozzle, 7 perimeter 

Diffusor frame PETG black

Diffusor PETG clear (transparent)

Make sure the xReflector sticker is present on the front cover, otherwise the LED light will be very dim.

Installation:

Power off the MK4S

Remove the xLCD from the frame

Remove the two lower screws (3x8sT) on the backside

Assemble the diffusor to the frame

Attach the diffusor frame to the backside with two screws 3x12sT

Mount the xLCD to the frame

Power on the MK4S, enjoy the status LED light

adapted the diffusor frame to fit on the MK4S molded cover

adapted the diffusor to fit on the remixed frame