Telescope Solar Filter & Case.

An attachment for your Telescope designed to hold 100mm (4") square sheets of solar filter. It will work with other filter sheets too of course.

Read about the filter on instructables | http://www.instructables.com/id/Astrophotography-With-the-Raspberry-Pi-Zero

Optional case to protect your filter when not in use.

It will fit on telescopes with a dew shield up to 100mm (4") in diameter.

STLs chamfered and orientated for best printings.

Print with your favourite thermoplastic | http://e3d-online.com/All-Filament

Required Components

1 x 100mm (4") Square Sheet of Filter.
8 x M3 16mm Socket Cap Screws.
8 x M3 Square Nuts.
4 x M4 16mm Socket Caps Screws.
4 x M4 Square Nuts.

Love 3D printing? Love T-Shirts?

Then you need to check out steps-per-mm.xyz!

It is loaded with a huge range of wearable Parts & Components.

Please help support my work here on Thingiverse and on Instructables by using the following affiliate links when making purchases. Thanks :)

eBay.com | eBay.co.uk | eBay.fr | Amazon.co.uk

Print instructions

Category: Physics & Astronomy Print Settings

Printer: E3D's BigBox

Rafts: No

Supports: No

Resolution: 0.25mm

Infill: 15%