Raspberry Pi Camera Desktop Stand

A desktop stand for the Raspberry Pi Camera.

Features an enclosed case to keep out dust and a path for the camera's FFC to run under the stand and out the back.

Optional cork base to protect the FFC underneath.

Print with your favourite thermo-plastic (http://e3d-online.com/All-Filament)

Required Components.

1 x Raspberry Pi Camera.
1 x Long Raspberry Pi Camera FFC.
4 x M2 6mm Socket Cap Screws.
4 x M3 25mm Socket Cap Screws.
2 x M3 30mm Socket Cap Screws.
6 x M3 Hex nuts.
Sticky Backed Cork Sheet.

Love 3D printing? Love T-Shirts?

Then you need to check out steps-per-mm.xyz!

It is loaded with a huge range of wearable Parts & Components.

Please help support my work here on Thingiverse and on Instructables by using the following affiliate links when making purchases. Thanks :)

eBay.com | eBay.co.uk | eBay.fr | Amazon.co.uk

Print instructions

Category: Electronics Print Settings

Printer: E3D's BigBox

Rafts: No

Supports: No

Resolution: 0.25mm

Infill: 15%