Suzuki Jimny In-Dash GPS - Raspberry Pi

Add In-Dash GPS Navigation to your Suzuki Jimny. Simply remove the passenger airbag, print and replace with this cover.

Full details on Instructables | http://www.instructables.com/id/3D-Printed-In-Dash-GPS-Navigation-Raspberry-Pi-3/

I have included a blank cover with no cut-out for an LCD so you can model your own design.

Love 3D printing? Love T-Shirts?

Then you need to check out steps-per-mm.xyz!

It is loaded with a huge range of wearable Parts & Components.

Please help support my work here on Thingiverse and on Instructables by using the following affiliate links when making purchases. Thanks :)

eBay.com | eBay.co.uk | eBay.fr | Amazon.co.uk

Print instructions

Category: Automotive Print Settings

Printer: E3D's BigBox Hybrid Dual

Rafts: Yes

Supports: Yes

Resolution: 0.25mm

Infill: 15%

Notes:

You will need a large-volume 3D printer such as the BigBox. You will also need to use SpoolWorks Scaffold Soluble-Support.

Printed with SpoolWorks Black Edge.

Post-Printing

Disolve

Soak in water to remove excess Scaffold support.