Printed using TPU at 80% size for a shelf corner. 2 Walls and 12% infill made it nice and squishy. Nice model! (edited)
Fantástico diseño. Sencillo y muy elegante
@SplinterPrinter Is there anyway you are able to make a version of this for a 12mm led strip vs the 10mm that it currently is for, please? (edited)
View 3 more comments
@SplinterPrinter @BeInYourSenses_25933 Thank you that helped. In the Profil Gesamt, are these two the only two dimensions (see red arrow in the picture I attached) I need to change in the model to make the width for the LED strip from 10mm to 12mm?
@BeInYourSenses_25933 If you get a 12mm version sorted out, please share. I need the same thing.
Are they so useful in a laser machine?
@bigsub_41496
It is usefull, if you have to repeat stuff. You can make a fixture for your parts and then your laser needs to repeat to the same position every time and every day. With limit switches you can press homing in light burn and the machine will go touch the switches and set 0,0 for you automaticly. Now you can always repeat to the same position, no matter what happened before..
I saw the inputs on the motherboard for the X,Y limit switches, and immediately wondered why didn't they add those? Thank you for posting the bracket design. Was going to do the same before finding your post. Awesome!
@DigitalArk
Wonderfull! Thanks for posting your make. I am glad, you figured out everything on your self as I still had no time to update this project. It is still on my backlog to built another device, clean up the CAD-files and make a decent instruction manual.
@Heatbreak_1578228
ahh, this is a fantastic use of the model. Thank you for posting your make!
@SplinterPrinter Thanks and my pleasure 😁 (edited)
