I don't have any experience with the AnkerMate App but I hope the profile works well for you.
I don't have any experience with the AnkerMate App but I hope the profile works well for you.
Dude, thank you!
I rarely have access to a pc, so I mostly print from the ankermake app, and thus I can't add multiple items onto the plate
This will be my "I'm going to bed" print
This is so fantastic!
I combined the head with my Dummy10 to be able to use some props. Let's call him Paul:
https://www.youtube.com/watch?v=yUdn7aYHtVw
Thanks for sharing :) (edited)
@Mici Haha I love it! Looks much better in gray too.
nice design. im printing the parts now, some are done and it fits nice, just my threads are kinda messing up when printing i need to figure it out
@EdwinOrnelas_2795749 It may help to try adaptive layer height on the models with threads, or just lower the layer height below 0.2mm on those parts. Good luck, it would be cool to see how it turns out, but let me know if you have any issues of thoughts on the design.
Enabling Arachne for the wall generator may possibly help too, though I doubt it will help as much as using adaptive layer height. (edited)
@MyStoopidStuff thanks, ill try it out !
@MyStoopidStuff Yes Yes :-). For a small army. Thanks, my son is very happy because of you. Regards
@Damian27 Thanks! I hope his Dummy 13's have some epic battles to protect the sandbox (or coffee table) :D
very tight, perfect fit with the improved spring, won't slide on your bar at all. Improved standoff for the redesigned mount allowing you to chose height as needed (I have a fan with push-through pins on mine so I need the 4mm distancer). The offset is perfect moving the Pi down a bit for better clearance of the USB cables. Fits Pi 4 and 5 just fine. printed in polylite ASA Jet Black
@Steinerse_1875806 Thanks for testing this and providing the pics!
I had forgotten to upload the 2 and 3mm standoffs, but they are now included.
Looks awesome!
Thanks, I'm gonna post another version with a drawer. There will also be a version with a drawer and a smaller cable stash. I'm just re-printing some tests for that version now.
Looking forward for the filament version.
Easy to print. Had some .95mm paper clip lie around. Some glue was needed to fix the wire.
Would prefer a version with filament as hinge.
The holes for the magnets are a bit loose, but could use glue.
Would be great to add some kind of lock mechanism, to hold the lid closed.
@MyStoopidStuff thats true about the magnet holes.
I can test the 1x1 with filament hinge if you want.
@Ben_248894 Thanks, I will probably post them up later this week or next and then see how the feedback goes in case they need some change.
*Insert DJ Khalid meme* ANOTHER! Great design!
Sorry i've just gotten around to taking photo's of these prints, i've been too busy printing these designs haha! Fantastic work, thanks so much for sharing these! You are awesome!
That spring design for the latches took me by surprise haha! When I printed the lid I thought "huh, these look strange" - it was only when I put it together and tried closing it that I realised, oh wow this is a genius design! :D
@KiriyamaSan_1462812 Haha thanks! You have the whole collection of them, I hope they work out well for you. This design took a bit of work to get right, but it was fun to make, and the final design was worth it.
Nice design, had a weekend of setting up a new storeage box, decided a 2x2 box would be nice.
@PeterRogers_673364 Thanks for the pic, it turned out great!
I updated the Dummy 13 Astronaut with a carded version, which includes all the armor parts on 4 cards, so you just need the frame parts from Dummy 13 to make the figure. You can find the Dummy 13 Astronaut card here:
https://www.printables.com/model/674660-dummy13-goes-to-the-moon-astronaut-remix-single-co There are some more pics and info, with updates on my other recent Dummy 13 related projects over on my blog ( https://www.mystoopidstuff.com/blog/a-couple-dummy-13-updates-on-the-way-eta-dec-16-18 ) too.