I have the newest 13in Framework and it doesn't fit the stand, the void also does not line up.
@Cyanotic_87289 Do you have any pictures to share? I'd like to see where the difference between the new and old designs don't line up with the stand. I have a AMD upgrade board coming "soon" but since it's an upgrade to the existing design I don't think I'll have any issues.
Also, which version of the stand did you use? If it's V1, it will cover up the front left port.
Edit: I thought about this and you are probably referring to the void for the release button. I'll check on that and get back. (edited)
Printed in matte PLA. No issue with bridges, no supports or raft. 5/5. Thoughts on the design if it matters:
Very tight fit. It actually depresses the release button it's so tight and caused one of the expansion cards to come out. Not sure how I feel about that but it's not going anywhere at least. Another thought, the bottom hole is not deep enough to handle anything that sticks out like HMDI. I have my USB dongle and power on that side but it would be sweet if it was tall enough to fit a display cable. See my pictures for what I mean!
@iamstevedavis_212961 Thanks for the like and comments. I appreciate the great feedback.
I honestly didn't experience the depressed eject button until I read your comment. There's an easy design change I can make.
About the tight fit. I don't have my printer dialed in 100%, so I used a file to take a little off the sides. I can see that the next revision needs to be a tad less tight there.
About the HDMI port: I made the design decision to keep the dock low profile, and if you want an HDMI or DisplayPort adapter there it would need to be a right angle plug instead of a straight plug. It's why the bottom hole has a weird notch that makes it a little wider for the second dongle.
As for making it taller to accommodate a straight plug, I'll think about that one, the cable I purchased off Amazon is $16, which is the price of budget spool of PLA.
@MattH_148110 oh great points! I did not even think about a 90 degrees HDMI! Thanks again Matt and keep up the awesome work
Thanks for sharing your result Matt! I love your DIY power button and the LED light mod! :)
@makerunit_735717 Thanks! I appreciate the comment! I do want to thank you for designing the case in the first place, I'll comment on your model shortly. :)