I've had this tree for years but I didn't know I needed a case for it until I saw your post on reddit.
Cheers for the upload
@StephenBurde_1421458
Brilliant. Thanx for sharing.
This just scrolled by and I thought: Hey, that looks like my tree I have set up a few days ago and is ugly with its battery compartment. Let's print this and make it look better.
Fits like a glove.
Printed in Prusament PETG Prusa Galaxy Black.
@Balu
Thank you for sharing your make. Glad to read that it fits well.
Thanks!
@philphilphil
Nice! Thank you for using this design and commenting.
Hey guys - Im hoping someone can save me the trial and error time of letting me know how many of each of the included baseplates are needed to cover the inside of 1x drawer. I noticed the regular baseplates without the lip are slightly undersized - is that deliberate or to compensate for printer calibration etc?
@C15RSN_372745 want to know the same thing, i have a 4 drawer regular size nordli and want to know which file to print for covering one drawer completely
@CarloPalermo_2184954 I have started to print them and I believe I now have the answer.
Overall one Nordli drawer will take a grid of 9x17 gridfinity squares. The baseplates with '173mm' in the name have one wide 'edge'. You need these baseplates on both the left and right sides of the drawer
You will need to print the following for one full drawer:
2x baseplate_4x5_173mm_ikea_nordli.3mf
2x baseplate_4x4_173mm_ikea_nordli.3mf
2x baseplate_4x5_ikea_nordli.3mf
1x baseplate_4x4_ikea_nordli.3mf
1x baseplate_5x5_ikea_nordli.3mf
With this information, plus looking at the photos already included from the designer and other makers, you should have all the information needed.