Bambu Lab P1P Fan Duct for 40x10 or 40x20 mm Fan
Simple Fan Duct for the P1Ps MB fan - holds with friction fit but can be secured with a single M3x6 screw
45
349
3
3520
zaktualizowano 11 czerwca 2023
Opis
PDFPrint from a temperature resistant material, PLA is not suitable - use PTEG, ASA or ABS for example.
Note: measure your heatsink, the older models are 18 mm wide, the newer models 20 mm
Tagi
Pochodzenie modelu
Autor oznaczył ten model jako własne oryginalne dzieło.
