Case for FluidDial CNC pendant for FluidNC, w/ M5 Stack Dial, v2.0 - new w/ support for FluidDial Starter Kit sold by Bart Dring

UPDATE:

Newly posted as of Oct 12, 2024: FluidDial CRADLE v2.0 - for LowRider v4 (attaches to YZ plate on X-min side) - https://www.printables.com/model/1037601-fluiddial-cradle-v20-for-lowrider-v4-attaches-to-y 

…now back to your regularly scheduled programming…

---------------------------------

This is a remix of my earlier FluidDial case — now with support for the FluidDial Starter Kit sold by Bart Dring. Obviously if you're making yours without the starter kit, you could use my earlier release of the case.

• Buy Bart's FluidDial Starter Kit: https://www.tindie.com/products/33366583/fluiddial-connection-starter-kit/  

The starter kit looks like this (M5 Dial not included):

PCB's included in kit (it also has wiring and mount screws):

As a “stand-off” is needed for the smaller PCB that goes with the Jackpot board / 6pack board (smaller one of two PCB’s in the kit), I’ve now modeled that up, with two variations — one with an anchor hole for looping the comm/power cord through before plugging it in, and another one without that.

Note: the printed stand-off gets one screw in through the bottom of the Jackpot, and another screw in through the top of the pendant PCB.

I'm providing three variations of the printed base: one for magnets inside, one for magnets outside, and one without magnets. The size for the round disc magnets is listed as 2 mm x 5 mm (nominal).

This case should fit any of my various cradle designs, of which I offered versions with and without magnets.

For various details related to printing and use of this set, please see the listing from which this is a remix.

Please note that as soon as the LowRider v4 CNC is made public, I will aim to offer a cradle design made for it too. 

UPDATE: since the LR4 is now released, here is a link to the cradle:

https://www.printables.com/model/1037601-fluiddial-cradle-v20-for-lowrider-v4-attaches-to-y 

Change log:

• Oct. 13, 2024 —added new Stand-off options for M3 machine screw. Previous Stand-off options were for tapered (self tapping) screw.  

New with support for FluidDial Starter Kit sold by Bart Dring.