Inspired by Guytas' SD Card Labeling model, This is a smaller form factor with a write-on surface for notes.
17
125
4
1003
updated December 20, 2021

Description

PDF

Stores standard SD cards and micro-SD cards in adapters.

Sharpie Fine Point markers write well and easily erased with alcohol.  

After printing, flex the spring to break free any bridging artifacts.

Insert an SD card by placing it against the spring then press down on the left side to snap it into place.

Printing

  • Prusament PLA
  • Layer Height: 0.3mm Draft
  • Perimeters: 2
  • Infill: 20% Grid
  • Printer: MK3S
  • Supports: None

Tags



Model origin

The author remixed this model.

License