Born in the 1900s

I heard this statement and felt it would go perfectly with the Oregon Trail wagon on my desk. I also included a basic stand for the print.

PRINT DETAILS

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to White
At layer #17 (1.44mm) swap to Green for the rest.