Netatmo Presence Shield

Is your Netatmo Presence camera not a fan of sunbathing? Neither was mine—until one overheated and took an unscheduled break! That’s why I designed this Weather Cover to keep it cool, shady, and in tip-top shape. Perfect for preventing those unexpected 'camera naps,' this cover shields your Netatmo from the harshest sunlight without blocking its view or features."

Printing Instructions:

• Material: Use PETG for its durability and heat resistance—perfect for outdoor use.
• Color: Bright colors like white, yellow, or gray are recommended to reflect sunlight and keep your camera cool.
• Layer Height: Set to 0.2mm for a good balance between print quality and speed.
• Infill: Use 20% infill to maintain strength without using excessive material.
• Print Orientation: Position the cover so that the main opening sits flat on the print bed for the best results.
• Supports: Not needed.
• Nozzle Temperature: 240°C for PETG (adjust based on manufacturer specifications).
• Bed Temperature: 80°C to ensure proper adhesion during printing. 
• Print Speed: Recommended 50mm/s for optimal print quality.
• Since this is a long print, applying glue on the print bed may be needed to prevent warping or lifting during the process.

Installation:

• No screws needed! This cover is designed for a tight fit—just slide it onto your Netatmo Presence camera.
• Once in place, the cover will expand slightly when exposed to sunlight, creating a snug, secure fit that stays put even in windy conditions.
• Simply pop it on and let the sun do the rest—your Netatmo will be shaded and protected in no time!