Modified Barbie Closet ( 1/6 scale )with Modern Doors including hangers I found

Remixed doors to have modern easy to grasp for granddaughter handles.  I only include a single stl file, you just swap x axis in slicer.   I include 3mf file, it has LEFT and RIGHT printed on door in different extruder. You change this to your kids names.  I covered the names in the photo for privacy reasons.  Sliced with PETG for body and PLA supports. Used PLA for doors and closet rod.  Infill 100% for rod.  Much less for everything else (see 3mf files).   I included the draws but I never printed them, too many parts for littles.   Draws won't fit on bottom with remixed tracks, but the new deeper tracks will help littles.  I resized doors so they don't need sanding to fit.  Just rub the bottom and top edge of doors with a bar of soap (old trick, don't do this if you are BOEING).    

Also, remixed closet body has improved rod support. Consider a drop of crazy glue at mid point and ends of rod. 

I have now printed one of the original of these and one remixed one.  My guess is there will be many more in my future as they step on them (one reason I went with PETG for body).  If I knew how to print in TPU I would give it a shot, though it's like 800g of PETG for the body. 

The tight interface of the PLA supports with the PETG is out of this world. 

The Prusa XL ability to do multi-material is great for using PLA as a support material for PETG. 

Remixed doors to have modern easy to grasp for granddaughter handles.  I only include a single stl file, you just swap x axis in slicer.   I include 3mf file, it has LEFT and RIGHT printed on door in different extruder. You change this to your kids names.  I covered the names in the photo for privacy reasons.  Sliced with PETG for body and PLA supports. Used PLA for doors and closet rod.  Infill 100% for rod.  Much less for everything else (see 3mf files).   I included the draws but I never printed them, too many parts for littles.   Draws won't fit on bottom with remixed tracks, but the new deeper tracks will help littles.  I resized doors so they don't need sanding to fit.  Just rub the bottom and top edge of doors with a bar of soap (old trick, don't do this if you are BOEING).    

Also, remixed closet body has improved rod support. Consider a drop of crazy glue at mid point and ends of rod. 

I have now printed one of the original of these and one remixed one.  My guess is there will be many more in my future as they step on them (one reason I went with PETG for body).  If I knew how to print in TPU I would give it a shot, though it's like 800g of PETG for the body. 

The tight interface of the PLA supports with the PETG is out of this world. 

Also included the hanger from _aaron so you can find it in one place.