Articulating Raspberry Pi Camera Bibo 2 Touch mount

This is a bracket that will connect to the corner of the BIBO 2 Touch printer. It is designed to be used with "Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2."

I used 2 of the enclosure mounting holes and replaced the original screws with 3m 20mm screws.

I am using it to hold a touchscreen, but it could also be used to mount a camera. I used PETG, but any filament type should work.

Print Settings

Printer:

Bibo 2 Touch

Rafts:

No

Doesn't Matter

Resolution:

0.15mm

20%

Filament: Amazon Basics PETG Black

Notes:

I manually added supports for the holes, but that may not be needed.

Completely new bracket for a different printer using the same articulating mechanism.