CASE AK2 PLUS (FIREBAT, NIPOGI, KAMRUI...)

Materials used:

- 4 M3 insert (OD 5mm , Length 5mm)
 

- 4 M3x30mm screws

- 5V fan and 2 pins (25mm thick)

- 2 pieces of 6x3mm sealing tape for the base (3 mm high to help cooling and serves as anti-slip)
 

-40x40x11mm heatsink (you can keep the original by cutting the cover).
 

PETG printed base, PLA cover

Redesigned the entire body to give it more thickness and allow a closed cover for the fan, ventilation at the base in the shape of a honeycomb, rounded edges, added a cover for the fan which makes everything cleaner without showing the side of the fan.