FULL NECK CHAIN COLLECTION

Out now the full neck chain collection includes the basic, cyber and scaled neck chains.

Each variant comes with 4 editions - 2x lengths, one with hook loop and the other without.

Also Included is 4x pendants - the basic, blood, cutie and spike.

Comes with 3D printed hook or if you prefer to use a stronger hook I recommend these - https://www.amazon.co.uk/dp/B0D2L3W3X9?ref=ppx_yo2ov_dt_b_fed_asin_title

All optimised for silk and completely print in place with no supports or brim needed - I recommend the hook to be printed in a stronger filament however if you are using it.

Basic prints in approximately 1 hour.

Bambulab perfected print profile included.

Cyber bracelet is designed to be printed using dual color when swapping filament at the layer height the stripes begin.

Print settings -

Note - maximum bed adhesion necessary, ensure your first layer is perfect and the rest should be easy.

Individual wall thickness - 0.3mm with 2x walls

Gyroid infill 15%

First layer speed - 10mm/s

Other layers approximately 40mm/s

Z-hop recommended on for travel distance greater than 0.2mm

Enjoy.