Colorado Flag Keychain - Single Extruder Multi Color Print

I wanted to try printing a multi-color print on my single extruder printer.

To print this I lined up all the files in Cura (I uploaded the project file,All.3mf, if you want to try and just use that) The deleted all of the objects except for the one I was printing. Once it was done I immediately preheated the bed and nozzle (as to avoid warping) and switched to the next color. You need to print them without brims or rafts, and I had it so my initial layer height was 0.3mm with one layer on top of that. As long as you don't make them too thick you should be fine.

I printed them in the order:

1. CO - White.stl
2. CO - Blue.stl
3. CO - Red.stl
4. CO - Gold.stl
5. Shell - Black.stl
   It shouldn't matter the order too much as long as you print the shell last.

Print instructions

Category: Keychains Print Settings

Printer Brand: Anet

Printer: A8

Rafts: No

Supports: No

Resolution: 0.1 mm

Infill: 25%

Filament: Hatchbox ABS True Blue; True White; True Black; True Red; Yellow