Self Centering Door Latch Jig (replaceable insert) v2

This is an updated version of my self centering door latch jig. It has a replaceable insert that can be popped out and replaced if you accidentally catch it with the router bit. I also included a depth stop to set the router.

Required Hardware 

• (2x) M3x12 screws
• (4x) M3x20 screws
• (6x) M3 Nuts

Print in whatever material you like, i did mine in ABS but it should work with almost any filament. Using a ½ inch Bit will work for rounded corner plates. then you just need to chisel out corners for square.

Links to other required things

• Template router  bit I use
• Metric Screw Set