This works incredibly well! I'm using two A1 Mini brushes that i glued on with epoxy glue and printed the bracket from ABS-GF as regular ABS was getting too soft printing ABS itself.
These are the changes i made to my printer.cfg and it's wiping the nozzle across both brushes perfectly.
clr_noz_start_x: 82 #95 clr_noz_start_y: 225 #221 clr_noz_len_x: 52 #40 clr_noz_len_y: 1 #2 clr_noz_quick: true #missed in K1 clr_quick_high:0.7 #missed in K1 clr_xy_quick_spd:100 #missed in K1 clr_quick_times:10 #missed in K1 clr_quick_react_dis:5 #missed in K1
@KeremKesici_2183209 Hey friend, were you able to calibrate the mesh without the problem reported by you? I did this mod but the mesh where the silicone is is very high in the klipper
This works incredibly well! I'm using two A1 Mini brushes that i glued on with epoxy glue and printed the bracket from ABS-GF as regular ABS was getting too soft printing ABS itself.
These are the changes i made to my printer.cfg and it's wiping the nozzle across both brushes perfectly.
clr_noz_start_x: 82 #95
clr_noz_start_y: 225 #221
clr_noz_len_x: 52 #40
clr_noz_len_y: 1 #2
clr_noz_quick: true #missed in K1 clr_quick_high:0.7 #missed in K1 clr_xy_quick_spd:100 #missed in K1 clr_quick_times:10 #missed in K1 clr_quick_react_dis:5 #missed in K1
@KeremKesici_2183209 Hey friend, were you able to calibrate the mesh without the problem reported by you? I did this mod but the mesh where the silicone is is very high in the klipper