BetaFPV Air65 Canopy Replacement: low camera angle

UPDATE 3: IMPORTANT only use these new files with the cutout for the U.FL socket (see images). The old design by BetaFPV likes to knock the U.FL right off the board… Ask me how I know. If you're in a similar situation, I wrote up a quick guide on how to solder it back on without having to replace the AIO. The only other change is that I made the long version just a tiny bit longer to make the screw hole spacing more consistent with the rest of the holes. The old model had them too close to each other. Added new photos in gallery.

--------------------------------------------------------------------------------------------------------------

UPDATE 2: I've added a file that has more rear mounting holes for a shallower angle. The length is increased by about 7mm. If you feel like you're flying a bit too fast, it might be worth trying this canopy to get used to the controls, but in the long run I'd recommend sticking to the original canopy dimensions for the best visibility :)

--------------------------------------------------------------------------------------------------------------

UPDATE: I've added a file with a lot of material removed. Maybe try printing it and the original file for side by side testing. I might even reduce the overall thickness with further iterations. The original file resulted in a canopy that is approx. double the weight of the stock one (1.3g vs 0.7g).

This new lighter canopy weighed about 1g and feels sturdy enough.

--------------------------------------------------------------------------------------------------------------

Since the original canopys all break around the rear screw holes, I made a direct replacement that works just like the original. The camera is a tight fit but still uses the original screw, just like the stock canopy does.

The antenna hole is smaller since I often had mine shoot out when crashing. I still use zip ties to be extra safe.

Printed in 64D TPU, which is still a bit more flexible than stock. Maybe try something stiffer, it works great for me though!