Prusa XL Enclosure PiCam/Y-Axis Mounting Point

Provides a mounting point for a PiCam on the Prusa XL Y-Axis arms inside the PrusaXL Enclosure

Requires a M3x10mm screw and nut.

Remove a rivet of choice where you want the mount to go, slide this model onto the top inside edge of the Y-Axis cover and line up the mounting hole with the hole created by the missing rivet.  Attach with a screw and nut.

This is basically a modification to my non-enclosure design: https://www.printables.com/model/686567-prusa-xl-picamy-axis-mounting-point.

Hope you find it useful.