Hi ! I needed a simple HDD holder for my homemade NAS, so i made this one using some picture of a model I found on Aliexpress…
I made it so it can support up to x2-92mm fans to keep everything cool (print the fan supports even if you will not use fans, it help keeping the structure solid!)
Support up to 6 drives; use m3 short screws to hold them safe.
printed everything with 20% infill, 0.2 layer hight (you can do 0.25-0.3 if your nozzle is able to)
Happy print!
any comment on what i could upgrade and how was your experience will be appreciated!
ty!
The author marked this model as their own original creation.