A magnetic mount and plate that attaches a Vive Tracker/Tundra Tracker to your Quest 3.
Original Model by cucumberworks: Quest 3 Vive Tracker/Tundra Tracker Mount
This requires additional hardware to assemble.
Attach the peg to the Plate using superglue or similar.
Attach magnets using superglue or similar. Make sure they're in the right direction!
Use screw to attach plate to tracker and strong 3M tape to attach mount to Quest 3.
The screw will be compress the extra material in the hole for a snug fit. To ensure the plate is strong enough, you may want to use more infill than normal (70% or more).
You can optionally sand parts for a better fit, like shown in some of the pictures.
All the parts can be printed without supports.
Tested with Vive Tracker 3.0 and Tundra Tracker using PLA/PLA+.
The author remixed this model.
Modified to be detachable with a mount, plate, and magnets.