Pastamatic with Manual Crank
Added a crank handle to the driven male spindle.
63
280
3
2418
updated August 12, 2024
Description
PDFAdded a crank handle to the driven male spindle as I don't own a drill. While it takes longer than 2 minutes to wind, it works.
Requires supports in the gap where the spindle meets handle
Crank handle was taken from https://www.printables.com/model/407688-bambu-lab-p1-x1-x1c-x1cc-filament-spool-switcher-w
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Added a crank handle to the driven male spindle.
