Super Mario Bros - Warp Pipes (Planters)

Enhance your 3D printing collection with this set of Warp Pipes, designed to replicate the iconic pipes from the original NES game, Super Mario Bros. This collection features four different sizes, each providing a nostalgic touch to any display or project.

Features:

• Authentic Design: Accurately modeled after the pipes from Super Mario Bros.
• Four Sizes: Small, Medium, Large, and Extra-Large 
  • Small: 44 mm x 44 mm x 28 mm (Filament: 4.25m 12.58g, Time: 35m)
  • Medium: 44 mm x 44 mm x 42 mm (Filament: 5.42m 16.03g, Time: 46m)
  • Large: 44 mm x 44 mm x 56 mm (Filament: 6.55m 19.39g, Time: 58m)
  • Extra-Large: 44 mm x 44 mm x 70 mm (Filament: 7.71m 22.80g, Time: 1h9m)
• Detailed STL Files: High-quality files for clear and precise prints.
  • All Four Sizes (Filament: 23.35m 69.08g, Time: 2h25m)

Print Settings:

• Print Mode: Normal @ KOBRA 3 0.20 mm for a balance between quality and speed.
• Layer Height: 0.2 mm (for a balance of quality and speed) or 0.1 mm (for higher detail)
• First Layer Height: 0.2 mm
• Vertical Shells (Wall Thickness): 2 perimeters (approx. 0.8 mm)
• Horizontal Shells:
  • Top Layers: 8 layers (solid top finish)
  • Bottom Layers: 8 layers (solid bottom finish)
  • Minimum Shell Thickness: Top and Bottom: 1.6 mm (for layer height 0.2 mm)
• Infill:
  • Fill Density: 10% (minimizes filament use while maintaining strength)
• Brim:
  • Type: Outer brim only.
  • Width: 2 mm (ensures good bed adhesion)
  • Separation Gap: 0.25 mm
• Support: Use support enforcers only. Note: Does not print organic trees

For practical use as a planter, consider scaling up the design to provide a wider base, which supports better plant growth. Also, these warp pipe planters are designed for ease of printing without the need for supports. Please note that the base may not be fully solid depending on the inherent traits of your individual printer. 

*For optimal results, I recommend increasing the infill to 30% - 50% to enhance thickness and improve water retention, as this design does not include a drainage hole.

Complement your Warp Pipes with the Super Mario Bros - Warp Pipes Brick Planter Base.

If you appreciate my designs and find them inspiring, consider supporting my ongoing projects with a coffee. Your generosity helps me continue to learn, experiment, and share my passion with you. Buy me a coffee.