Ultralight Backpacking Saw - Uses Sawzall Blades v2!

Total pack weight of <120 grams. Rock solid in ABS, other material mileage may vary

Utilizes diablo 9 inch carbide tipped wood blades. May need to drill out retention hole in blade with other brands. 

Print Specs

• ABS
• .4mm nozzle
• .2mm layer height 
• .4mm extrusion width
• 30% infill 
• 4 perimeters / 5 top & bottom layers
• (Can reduce infill, perimeters and top/bottom layers on sheath for additional weight cutting)
• No Supports Required

Recommend to print included test prints first for scaling, the fit is TIGHT

Additional Hardware used

• 5x M4x8mm Bolts
• 5x M4 Nuts

Happy Trekking! 

**Remixed model for better clearance**