One piece frame The 100 space edition

Since I have the 500mm volume large profile printer, I remixed the frame from 4 pieces to 1 piece to reduce assembly time. 

Please download the STEP file for printing.

Assembling time lapse video:

For the remix, I did few changes on the small parts:

Top frame:

•  I added more bolts to the clamps to ensure the rod is securely fastened. The 285mm rod will be part of the structure, so I removed the bottom part of the frame.

•  I modified the gantry carriage to fit the 285mm rod.

Printhead:

•(“021” just for fun because it is my lucky number, the STEP file I was upload is “100”)

•I modified the bracket to fit the v6 hotend: Print link

Extruder:

•Voron M4 Extruder is pretty good option, but I also design the bracket for BMG extruder which is not need to drill any mounting holes on frame. Print link

Bottom frame:

• I remixed for easier assembling process.

• All the fastener exposed outside.

• Use the M5 bolts for the 2020extrusion hardware.

BOM:

•Base on https://www.printables.com/model/572689-the-100-v11-the-fastest-3d-printer-based-on-a-prin I have following changes:

• 285mm liner rod x 6.

• 20x20 250mm aluminum extrusion x2.

• V6 hotend.

• Raspberry Pi.

• All other materials are same.

Printer required:

• Print area of the printer should greater than 350mm x350mm.

Key settings:

• 25% Infill.

• 0.25 Layer height.

• 4 Walls.

I remixed the frame from 4 pieces to 1 piece, to reduce assembling time. Also including other small parts remixed, please see detail.