PLEASE NOTE: Keyboard switch power handling is in the ballpark of 12v AC/DC @ 10 mA. This may or may not. work with a given radio configuration. Use of a keyboard switch is AT YOUR OWN RISK in any given setting. I make no assurances of function or safety.
This is a hand held PTT (press to talk) switch for use with a radio transceiver. You can use it with either trigger finger actuation or flip it over and use a thumb press.
It is designed with a mechanical keyboard switch in mind (like a Cherry MX or, as in my case, an Akko CS tactile key). The opening is sized for a press fit install of the switch. In addition to the handset, I have included an .stl file for a PTT key cap.
The handset was remixed from maximeyang's "Gopro DJI handle grip"
(https://www.thingiverse.com/thing:4917615) with reduced resolution from the original.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:No
Supports:
No
Resolution:0.2
Infill:
20%
Notes:
This can be printed with most any filament type without supports. I used an 85a TPU because I liked the hand feel, but it would work as well with PLA, PETG or ABS.
Category: ElectronicsThe author marked this model as their own original creation. Imported from Thingiverse.