I didn't like DJI's solution of attaching the remote control to the handlebars of my bike using the strap.
It was too cumbersome and always got twisted when operating it.
That's why I designed this very simple holder that can be attached to any 22 mm handlebar with 2 cable ties.
On the BMW R 1200 GS, the holder is supported by the clutch reservoir. This means it can be operated without any problems and without becoming misaligned. It couldn't be simpler!
Mount the holder with 2 cable ties on the left side of the handlebar.
Attach the remote control and you're done.
The remote control can be easily removed upwards when not in use.
Print in PETG
Layer 0,20
Infill 100%
Supports on bed only
Brim 5 to 10 mm
The author marked this model as their own original creation.